The Nicab Due ballvalve for secondary refrigerant systems is a development from the Nicab STANDARD, specially designed to handle low temperatures and different types of secondary refrigerants like Glycol, Freezium, Hy-Cool, Temper and Tyfoxit.
Secondary refrigerant valve 2 or 3 way intended for regulation of the temperature in display cabins, cold rooms, etc.
- Internal relay
- 2 potentialfree contacts
- 2 LED’s (indicates cooling/defrosting)
- 3 O-rings in EPDM rubber
- Internal condense protection
- Compatible with earlier versions
- - DN15 - DN40
The Nicab Due ballvalve for secondary refrigerant systems is a development from the Nicab STANDARD, specially designed to handle low temperatures and different types of secondary refrigerants like Glycol, Freezium, Hy-Cool, Temper and Tyfoxit.
The valve is ON/OFF type, the ball in the 3-way valve has a special drilling which gives a secure and stable flow through the valve even when the valve is shifting port, for example in defrosting. The valves are manufactured as both 2 and 3 way depending on system design.
The same type of actuator is used for all valves regardless if it’s 2 or 3 way. On the top of the actuator there are two LEDs that indicates cooling and defrosting.
To control the valve you can use a thermostatic control with an open/close contact.
The voltage is 230 V or 24 V depending on design. There is also two potential free contacts on plint to receive a signal back from the micro switch.
