The Tarp is manufactured from Trevira fabric with PVC coating and has fiberglass reinforcement bars to resist air pressure. The Tarp is fixed onto the suction wall with special guide tracks and rollers for adjustment to different pallet heights. This pressure roller secures the Tarp to follow the pallets and guides it to cover the pallets completely airtight. We advise placing our integrated and depressible foam buffers (100×100) on the suction wall to prevent air by-pass behind the pallets.
Ripening
- Curtain width 3.000 mm.
- Foam buffers 4 vertical, 1 Horizontal.
Pre Cooling
- Curtain width 1.500 mm.
- Foam buffers 2 vertical, 1 Horizontal.
- Tarp Type 1 we advise in case of many partial loads
Tarp
- PVC-coated fabric weight approx. 650 gr/m2 with reinforcements of glass fiber tubes at every fixed mm to resist the pressure difference.
Standard color Tarp and Foam buffers
- RAL 1003 Signal yellow
- RAL 5015 Sky blue
- RAL 5005 Signal blue
- RAL 7038 Agate grey
- RAL 5002 Marine blue
- RAL 6026 Opal green
- RAL 5013 Cobalt blue
Fitted with a manual movable roller pipe in a rails system, electrically operated by single-phase 220V tube motor easy to use by a personnel switch.
Fixed point with roller pipe on the ceiling of the room and electrically operated by 3-phase 400V/50Hz. Operator with fixed switch in front of the room.
Fitted with a manual movable roller pipe in a rails system, electrically operated by single-phase tube motor easy to operate using a personnel switch.
Fixed point with roller pipe at the ceiling of the room and electrically operated by single-phase tube motor. Operator with fixed switch in front of the room.
Fixed point with roller pipe at the ceiling of the room and electrically operated by 3-phase 400V/50Hz. Operator with fixed switch in front of the room.
Wall installed with roller pipe and electrically operated single-phase 220V tube motor. Operated with supplied remote control and aluminum hand stick.
